Cutting torch Demolition torch Gloor Garant 3 pipes
Regular price
€247,74
Cutting torch Demolition torch Gloor Garant 3 pipes
| Description | This burner is used for demolition work. The stainless steel pipes are soldered in a jaw holder on one side and there is a soldered connection in the tap body on the other side. Because no adhesive connections have been used, the chance of leakage from the burner is very small. By using nozzle-mix nozzles, there is almost no chance that the burner will break in the event of a backfire. Usually you can continue working after replacing the cutting nozzle. The 50cm cutting belt is equipped with a 90 degree jaw holder. This is the most common length. This burner is also available with a 100 or 120 degree jaw holder and in a 70 cm or 100 cm length. |
| Remark | As a demolition torch we recommend the HP1 cutting torch (6150), a cheaper and less heavy cutting torch than the Gloor Garant with a solid jaw holder. The cutting nozzle determines which gas should be used to cut. If you want to switch from acetylene to propane, only the cutting nozzle needs to be replaced. The cutting torch does not need to be adjusted for this. |